Home Page
About Geobrick
Information on Geobrick Gallery Contact Us

 

Product Specifications

Geo Brick is a clay / gravel and cement composite brick, manufactured through a dry press process at Bealiba, Victoria.

Geo Bricks can be used in:

  • External and internal brickwork features
  • Structural and load bearing applications
  • Landscaping and garden walls
  • Thermal mass
 

Geo Brick Range


 

Geo Brick
4

Geo Brick
8

Geo Brick
12

Geo Brick
16

Dimensions
Length (mm) 230 230 230 230
  Width (mm) 110 110 110 110
  Height (mm) 76 76 76 76
Dimension Category   DW2 DW2 DW2 DW2
Average Weight/unit kg 3.7 3.7 3.7 3.7
Geo Brick Colour Range   All All All All
Oxides   Nil Nil Nil Nil
Greenhouse Gas Emissions Reduction# % 90% 77% 63% 50%
Average Unconfined Comprehensive Strength*
Mpa 7 14 19 27
Unconfined Comprehensive Strength Mpa >6 >12 >18 >25
Potential to effloresce
Classification *
  Slight Slight Nil Nil
Resistance to salt attack
Exposure category*
  General
Purpose
General
Purpose
General
Purpose
Exposure
Shrinkage
Mean coefficient of drying contraction*
Expansion
mm/m

mm/m

1.3

Nil

1.3

Nil

1.3

Nil

1.3

Nil

Initial rate of absorption
Mean gross initial rate of absorption*
Mean net initial rate of absorption*

kg/m2/min
kg/m2/min

0.2
0.2

0.2
0.2
0.2
0.2
0.2
0.2
           
# Estimated greenhouse gas emission reduction during production compared to solid kiln fired bricks, subject to full life cycle analysis in
conjunction with Sustainability Victoria
* The Brick & Mortar Research Laboratory testing in accordance with AS/NZS 4456
NB Geo Brick specifications subject to change without notice as research and development outcomes are reflected in improved products.
           

Brick Cleaning


Geo Bricks are a premium product that offer decades of unprecedented colour and presentation, if best practice
brick cleaning is conducted. We advise that you do not use an acid mixture or apply too much pressure. Geo Brick
recommends pressure cleaners are set no higher than 15 litres per minute, no greater than 1000psi and held no
closer than 300mm. For an exceptional finish, Geo Brick recommends choosing a bricklayer that cleans down
brickwork at the end of each course.

Gallery of images | Contact us

 


1300 855 098 | info@geobrick.com.au

site by greenGraphics